Come visit us instore - Try our products before you buy - Ask about our diving lessons - Seek general diving advice
Home >  Servicing

Servicing

Scuba Equipment Servicing

Regular servicing of your scuba diving equipment is very important to ensure safe, reliable performance and to ensure your diving equipment has a long and reliable life. Diving regulators should be serviced at regular intervals depending on time and the amount of use they have. This information is available in the user guide or instruction manuals for your regulators. Diving Cylinders have very strict test dates and are subject to regulations, if your cylinder is out of date or in poor condition then you will not be able to obtain a fill.

Remember scuba diving equipment is life support equipment so it is vital that it is serviced correctly by qualified service engineers, Certificates will be supplied following Cylinder Visual & Hydrostatic Inspections and Non Destructive Aluminium testing along with IDEST cylinder stamping.

We offer a full cylinder servicing facility with a 7 to 14 day turnaround, Hydrostatic tests, Visual inspection, Internal shot blast cleaning, O2cleaning service, External repaint, Valves and & manifold servicing, External painting can be done in a variety of colours.

A dry suit represents a big investment in your scuba diving equipment, it keeps you warm, dry and comfortable at least it does if it is working correctly.

We can offer all dry suit repairs such as new dry suit zips, latex or neoprene seals, latex or neoprene socks, dump valves, inflation valves, electrical heated vests, pee valves, suit adjustments, new boots, resize boots, suit leak tests these can all be carried out on membrane and neoprene suits by qualified service engineers. Our turnaround time is usually seven to ten days.

You're BCD, or Wing is an essential part of Scuba Diving Equipment and needs to be cared for in-between dives as well serviced at annual intervals. Debris such as salt deposits can build up in valves, inflators and indeed on the inside of the jacket which can cause damage which cannot be repaired.

Our BCD Service is a full service, including strip down of the inflator unit, clean and rebuild with new o rings and serviceable parts, inspection of all the deflation valves, weight holders, tubing, bladders, cording, clips and straps.

The repairs and service is carried out by fully qualified service technicians using only original manufacturer's parts, we hold the majority of these parts in stock and can offer a very quick turnaround on servicing

we offer dive computer and dive watch battery changes on all makes of diving computer and watches using original manufacturer parts and O rings.

Once the battery has been changed we then pressure test the computer to ensure it is both operating correctly and that it is leak free so that you can be safe in the knowledge that your computer has been repaired by professional fully trained service technicians.

Our turnaround can be same day or within 3 to 7 days usually.

Waterfront Scuba have extensive knowledge of the AP Valves Inspiration, Evoultion + and Evolution Rebreathers as well as diving these units regularly we carry a range of manufacturer parts and service items and can also a full service and repairs on these units.

Full servicing as required in the Maintenance guide of your Rebreather is carried by professional service technicians